车库门垃圾邮件
Garage Door Spam

原始链接: https://blog.harrison.page/garage-door-spam/

作者描述了在 Chamberlain 公司切断第三方 API 访问后,对 myQ 应用的不满。他们用两块 ratgdo32 本地 WiFi 车库门控制器替换了依赖云端的控制;这些控制器使用 ESPHome/HomeKit,并支持 LiftMaster Security+ 2.0 协议。电路板安装简单,获得了固定 IP,可通过 Siri 和网页界面控制。作者用每晚检查门状态的 Slack 脚本重现了童年时的“车库门开着”提醒。向维护者的拉取请求被接受。两块电路板可通过 Tailscale 进行健康监测。总体而言,这套装置在无云环境下本地运行,且通知会显示是谁打开了门,不像 myQ。

Hacker News 用户讨论 Chamberlain/myQ 车库门开启器应用推送通知垃圾广告且缺乏细粒度退出选项。原帖作者用开源 ratgdo/Home Assistant 方案替代 myQ,以避免广告并获得本地控制。评论者推荐 ratgdo、Tailwind、Meross、Shelly 继电器、Z-Wave/Zigbee 传感器和 Home Assistant 等替代方案,同时抱怨新版 Chamberlain Security+ 3.0 型号锁定本地控制。许多人批评 IoT 厂商的平台劣化:广告、订阅、云依赖和糟糕的隐私。用户提出的解决方案包括仅本地设备、Zigbee、Z-Wave 和 Matter 等标准协议、细粒度通知分类、Apple/Google 执行 App Store 指南以及监管。部分用户指出 Apple 自身的通知广告问题。总体而言,该讨论串突显出对广告驱动智能家居产品的不满以及对本地开源替代品的强烈兴趣。
相关文章

原文
Garage Door Spam – Harrison Was Here

In the beginning, my garage door opener worked fine. When the door opened or closed, I would get a notification. If I'm away from home and the door opens, something weird is going down. The "myQ" app generally worked although it was encrusted with ads:

Screenshot 2026-10-16 at 14

I continued using it because I trusted that notifications were meaningful...

...until recently (October 2026):

Screenshot 2026-10-16 at 13

This is un-fucking-acceptable. As in, absolutely fucking not.

The manufacturer (Chamberlain) cut off third-party access to its APIs (via myQ) in late 2023. In response, I purchased a pair of ratgdo32 devices to opt out of the bullshit.

ratgdo is a WiFi control board for your garage door opener that works over your local network using ESP Home or HomeKit

The device is a ~$62 board from ratcloud llc running open-source firmware that wires to the opener's existing terminals and speaks LiftMaster's Security+ 2.0 protocol locally.

order

These were easy enough to hook up. I won't reproduce the instructions here.

The bundle included six black wires, an auxiliary harness I didn’t need.

bundle

My router hands each board a fixed address at 192.168.0.192 and 192.168.0.245. Apple's HomeKit just worked and I'm able to control them with voice commands: “Hey Siri, open Door 1”

homekit

The devices have their own web interface:

xratgdo

When I was growing up, my father wired a mercury switch onto our garage door that lit up a light in the hallway when we'd left the garage door open. This was a valuable signal that helped our family avoid accidentally leaving the door open overnight. Since the ratgdo32 has a JSON status endpoint, I was able to rebuild Dad's solution in software with Slack:

Screenshot 2026-11-01 at 12

The script runs at night checking for an open door:

*/10 21-23,0-5 * * *  garage-watch

The repo maintainer made my day when I submitted a tiny pull request: "Simple and useful. Happy to merge this. Thank you."

Both boards are now reachable over my Tailscale network, so my monitoring software can load /healthcheck. This required a custom route:

/Applications/Tailscale.app/Contents/MacOS/Tailscale set \
  --advertise-routes=192.168.0.192/32,192.168.0.245/32

After approving the route, my monitoring software can verify the hardware is working.

Everything runs locally with no cloud, and notifications now say who opened the door which myQ never did.

To anyone at Chamberlain responsible for myQ, I offer my sincerest Fuck You.

联系我们 contact @ memedata.com