An orribol copi of FlipperZero, uit worst inglish
A Flipper Zero clone, but cheapest, DIY and simply Open Source, made with Arduino IDE

⚠️ Important Notice: This is just a fun project, it was started to pass the time, it is not at all professional and is not intended to be. Is not an alternative for professional device.

• STM32-L432KC (Microcontroller)
• FS1000a (Radio freq Transmitter)
• RXB12 (Radio freq Receiver)
• PN532 (RFID/NFC)
• IR LED & Reciver
• 2N222A PBFREE
• SSD1306(Display 128x64 OLED)
• TF CardMemory Shield
• TP4056 (Battery charger)
• DC-DC 5V BOOST (voltage booster)
• 6x 6x6x8mm push button
• Micro usb smd
• Battery 3.7 lipo

• RubberDucky

• RFID/NFC (Work in progress)

• IR

  • Read ir signal and emulate it or save it

• RF

  • Read rf signal and emulate it or save it

• Save/Load from SD

• Battery percentage

• Sd memory left percentage

• All programmable via Arduino Ide

• Add 3d printed shell (https://www.printables.com/model/1142768-flopper-ziro-shell), not finished yet