A general purpose kit used for various purposes including a fair amount of stationery bits to help with design.

Case

Lihit Lab Large Maroon Camo Book-Type Pen Case, LL00005-MC

Contents

Exterior

The exterior of the case has some pockets, so I've added some sticky notes.

• 500 thin sticky notes or markers:

Layer 1 - Multitool, scissors and penknife

My first layer is dominated by a fold-up multitool (see below), plus there's a pair of (rubbish) scissors and a Swiss Army knife.

• Multitool - this one was from Temu
• Scissors
• Swiss Army knife

Layer 2.1 - Cutters, grips and pen

• Chisel-tip black Sharpie
• Pair of side cutters
• Scalpel (mind your fingers!)
• Small Stanley adjustable spanner/wrench
• Two box/craft cutters (of many!)

Layer 2.2 - Miscellaneous

• Small screwdriver handle
• Set of screwdriver bits plus a socket adapter
• Wire stripper/cutter
• Tweezers of various configurations.

• Small adjustable spanner/wrench
• Another box cutter.
• Two pencils I picked up for free from eSpares
• Small brush (suitable for clearing cr@p out from a keyboard)
• Large pair of tweezers.

Layer 3 - Cables and stationery

• Collection of USB cables and USB 2-way splitter
• Paper clips of different sizes and colours!
• Bulldog clip in there
• microSD to full sized SD adapter.

• Another multitool
• Small (circuit board) ruler
• Small pair of tweezers
• Another box cutter (!)
• Socket set
• An iFixit prise tool (the blue bit of plastic)
• Small highlighter
• Tiny measuring tape
• Eraser.

It's quite a heavy kit, because of the multitools, but it's very handy!

As you can see in my Tiny Tookit, there’s a bit of duplication (especially box cutters!), but not much space left. I intend to expand the kit when I can to include an electrical-size screwdriver, some electrical tape and other stuff I can find as we go along and then get rid of the duplicates to make space.